CJ19-170 AC Contactor 130A Three Phase Electrical Contactor IP10 Magnetic Contactor
Product Description:
The CJ19 series switching capacitor contactor is mainly used in AC circuits at 50 Hz (or 60 Hz), with a rated operating voltage up to 690 V. It is used for low-voltage reactive power compensation equipment to put in or remove low-voltage shunt capacitors. The contactor is equipped with a surge current suppression device, which effectively reduces the inrush current impact on the capacitors during closing and suppresses overvoltage during opening. Meet the standards: GB / T14048.4, IEC / EN 60947-4-1.
Product Feature:
The CJ19 series switching capacitor contactor has a direct-acting, double-break structure. The contact system is arranged in two layers, with the upper layer consisting of a surge current suppression device made up of three pairs of current-limiting contacts and current-limiting resistors. When the contactor closes, it connects first, after a few milliseconds, the working contacts connect. The permanent magnets in the current-limiting contacts release under spring force, disconnecting the current-limiting resistors and allowing the capacitors to operate normally.
•CJ19-25 to CJ19-43 contactors have two pairs of auxiliary contacts.
•CJ19-63 to CJ19-95 contactors have three pairs of auxiliary contacts.
•CJ19-115 to CJ19-170 contactors have one pair of auxiliary contacts built-in.
The wiring terminals are covered with insulating covers for safety and reliability. The coil connection terminals are marked with voltage data to prevent incorrect connections.
•CJ19-25 to CJ19-43 contactors can be installed with screws or mounted on a 35 mm standard DIN rail using a slide-on bracket.
•CJ19-63 to CJ19-95 contactors can be installed on 35 mm or 75 mm standard DIN rail.
•CJ19-115 to CJ19-170 contactors can be installed with screws or mounted on two 35 mm standard DIN rails.
Product Specification:
| Parameter Name |
CJ19-25 |
CJ19-32 |
CJ19-43 |
CJ19-63 |
CJ19-95 |
CJ19-115 |
CJ19-150 |
CJ19-170 |
| Limited Current le (AC-6b)(A) |
17 |
23 |
29 |
43 |
72.2 |
87 |
115 |
130 |
| Controllable Capacitor Capacity(kvar) |
220/230V |
6.7 |
10 |
15 |
20 |
35 |
40 |
46 |
52 |
| 380/400V |
12.5 |
20 |
25 |
33.3 |
50 |
60 |
80 |
90 |
| 660/690V |
18 |
26 |
36 |
48 |
92 |
100 |
120 |
130 |
| Rated Insulation VoltageUi(V) |
690 |
690 |
690 |
690 |
690 |
690 |
690 |
690 |
| Surge Current Suppression Capability |
20le |
| Operating Conditions |
Pick-up:(85%~110%)Us；Drop-out:(20%~75%)Us |
| Coil Power (VA) Pickup/Hold |
70/9.5 |
110/14 |
110/14 |
300/57 |
300/57 |
660/91.2 |
660/91.2 |
660/91.2 |
| Control Capacity of Auxiliary Contacts |
AC-15:Je:0.95A 380V/400V DC-13:le:0.15A 220V/250V Ith:10A |
| Weight(kg) |
0.44 |
0.63 |
0.64 |
1.4 |
1.5 |
3.45 |
3.45 |
3.45 |
| Rated Impulse Withstand Voltage(Uimp) |
6kV |
| Protection Rating |
IP10 |
Operating Conditions and Environmental Suitability:
●The ambient air temperature is -5℃ ~ + 40℃, and the average value does not exceed + 35℃ within 24 hours.
●Altitude: not more than 2000m.
●Atmospheric conditions: at the maximum temperature of + 40℃, the relative humidity of air does not exceed 50%; a high relative humidity can be allowed at lower temperatures, such as up to 90% at + 20℃. Special measures should be taken for the condensation occasionally produced due to temperature changes.
●Pollution degree: 3.
●Installation category: Ⅲ Class.
●Installation conditions: The inclination of the mounting surface and the vertical surface is not greater than ±5°.
●Impact vibration: The product should be installed and used in places without significant shaking, shock and vibration.
FAQ:
Q:What's your MOQ?
A:Our MOQ is 1 pc.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q:Whether you could make our brand on your products?
A:Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.
Q: What is the shipping method?
A: It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).Please confirm with us before placing orders.
Q:What is your terms of packing?
A:Generally, we pack our goods in neutral boxes and brown cartons. we can also pack the goods in your branded boxes after getting your authorization letters.
Product Tags:
|
|
130A Electrical AC Magnetic Contactor 3 Phase IP10 CJ19-170 Images
|
